Rivo 50 Epoxy by Tenax

Product Image Click Image to Enlarge

Knife Grade epoxy 1:1, Straw color for all types of stone. Will bond to almost any surface, though polished surfaces should be honed for best results. 1RHA00BG50
Directions for use: Surface must be clean, free of dirt and grime, and Dry. Mix part A & part B, 50/50. Gel time is approximately 50 minutes with complete hardening in 12 hrs.

Faster in warmer weather, slower when colder. Similar to DOMO, but recommended when a faster gel time is needed.

  • Rivo 50 A & B 1 Liter Feature List
    VOC Compliant
    Designed for All Types of Stone
    Bonds to Almost Any Surface
    Suitable for Temperatures Below 32°
    Suitable for Extreme Heat
    Indoor & Outdoor
  • Rivo is one of the strongest epoxies in the stone industry. It will bond to almost any surface. Rivo 50 is designed for permanent application. The stone will break before the bond will. Suitable for temperatures below 32° as well as extreme heat. Recommended for both interior and exterior applications. Material must be dry before application.
    Make sure surface to be treated is completely dry and clean. Keep the glue and hardeners in their original cans. If using an automatic dosing pump avoid contact with metals made of copper, brass or similar metals which may rust. Avoid use of PVC plastic. Use only plastic that is corrosive resistant. Measure out, in either weight or volume, the correct amounts of part A and part B. Mix well using clean tools. Best when applied in a thin layer. Use acetone or butyl acetate to clean tools.

This is AG0046 Quart Part A & Quart Part B (Also available in: Gallon Part A & Gallon Part B)