Travertine Filler by Tenax

Travertine Filler 1 liter aka Travertine Strengthening and Filling Adhesive 14AC01BG50

Used to fill Travertine & Agglomerates with medium and large holes. Semi-Solid, Straw Colored. Directions for use: Surface must be clean, free of dirt and grime, and Dry. Mix by weight, not volume. Example: 100 parts of resin with 3 parts of hardener. Very important for proper strength. Gel time is approximately 4-5 minutes.
Hardener sold separately.

  • 1 Liter Travertine Filler Feature List
    Smooth & Easy to Spread
    Interior Use
    Will Accept a Polish
    Horizontal Applications

Tenax Travertine filler is used to horizontally repair, rebuild, glue, and fill travertine, as well as similar stones. Tenax Travertine filler is a semisolid consistency that is smooth and easy to spread. It is used to fill all size holes in travertine and will accept a polish. Not suitable for temperatures below 32°. Recommended for interior use. Other colors available upon special request.

Instructions for Use
Make sure surface to be treated is dry, clean and free of dust. If adding coloring paste do so before mixing with catalyst. An excess of coloring paste may affect the final product so use caution. Mix the catalyst with glue at 2 -3 parts to 100 parts of glue in weight (see chart below). Stir vigorously and apply. Apply a slight excess to account for shrinkage. Let the filler dry until the excess can cut off with a razor blade. Remove leftover traces with acetone. Do not place unused product back in can. Make sure can is sealed tightly after use.

Available in: Quart Gallon