Anchor Stencil

Due to supply chain issues, we are temporarily limiting stencil to our existing stencil customers.

As we continue to navigate through supply chain issues and production schedules, we are doing our best to take care of our stencil customers. Our existing stencil customers have priority.* (So click here if you are a new stencil customer) Most orders we send will be partials – we know you need to get by – so, presently, we cannot do drop ships. Pricing will need to be at the point of shipment vs when order was placed.

Intertape IPG® Brand Anchor Stencil

See Anchor stencil product info & charts | Stencil Miles Supply Part #s

Style 111 – For hand cutting. Panels can be accurately and easily replaced. Superior shape carving. Easier cutting means less wear on instruments. White release liner is easily removable.

Also Styles 116 and 129Y

ANCHOR GOLD DOUBLE LINER MEDIA BLAST STENCIL 790 series:

Style 790Y STENCIL – HAND CUT (new part #, formerly 123)
Single & double-process media blast carving of granite or marble.
High quality, durable stencil coated with an advanced, medium tack, rubber-based pressure-sensitive adhesive protected by a clear PET liner. Contains a yellow inner sheet of polyester which retains cut designs during liner removal.

Style 790YS – STENCIL – MACHINE CUT GERBER (new part #, formerly 124)
Single and double process media blast carving of granite or marble. Replaces #790Y in Gerber® plotter applications.
High quality, durable stencil coated with an advanced, medium tack, rubber-based pressure-sensitive adhesive protected by a clear PET liner. The 15” width will track and process on both IBM® and Gerber® pattern cutters. The 30” width will fit only Gerber® #750 plotter machines. Tractor-feed holes are punched through liner and rubber. The specially treated polyester liner retains cut designs during transfer from plotter to stone.

Style 790YT – STENCIL – MACHINE CUT IBM (new part #, formerly 154)
Single-process and double-process media blast carving of granite or marble. Replaces #790Y in IBM® cutter applications.
High quality, durable stencil coated with an advanced, medium tack, rubber-based pressure-sensitive adhesive protected by a clear PET liner. Half inch on center hole pattern designed for IBM® sprockets. Tractor-feed holes are punched through liner and rubber. The specially treated polyester liner retains cut designs during transfer from plotter to stone.

(Also referred to as vinyl or rubber for sandblasting stone in searches.)
To purchase or gather additional information about our Anchor stencil products, please contact Miles Supply today.

*(We can take orders *CLICK HERE* for new customers but they will not be shipped until our existing customers are served. We’re anticipating this will happen in the near future.) For our existing stencil customers, you many continue with this RFQ below.