Drilling and Coring Equipment

Metabo Rotary Hammer Drill

These SDS hammers are lightweight with plenty of "punch."  Designed to use the standard SDS (Slotted Drive System) carbide bit, these compact hammers have a great power-to-weight ratio and are typically much faster than the large spline drive hammers.  All Metabo SDS hammers can be switched to rotation only mode for extra convenience.

 

To view the complete Metabo Product line visit their Online Catalog, choose the tool that is right for your job and Contact Us for our best price.

 

Size
3/4" Metabo BHE 6015 Rotary Hammer Drill

1" Metabo BHE 24 Rotary Hammer Drill

 

Metabo Carbide Tipped Drill Bits

Available in a variety of lengths and diameters, these SDS shanked bits will out perform all other in the market.  Diamete sizes available range from 3/16" - 1 1/8".

Atlas Copco Air Hammer Drill

The DKR36 is a lightweight, versatile machine which Miles Supply believes is the perfect choice for drilling plug holes from 5/16" - 1 1/8" diameter.  This drill has a built in lubricator for easy maintenance.

Tapered Hammer Drill Bits

Available from Miles Supply in many sizes of both diameter and drill depth.  High impact carbide withstands constant pounding.  Adaptors are also available to accommodate tapered shafts.

Harper Utility Air Drill

Miles Supply has a wide variety of Harper air tools to choose from, including the popular 4105 or UT7 Utility Air Drill.  Miles Supply also carries a wide variety of replacement parts for these drills. 

Atlas Copco Chipping Hammers

Miles Supply recommends the Atlas Copco TEX 317 and 318 Chipping Hammers because they are designed to provide years of trouble-free service and are equipped with oil resistant neoprene exhaust deflectors.
                                

Feathers and Wedges

 

A time tested way to split stone, Feathers and Wedges, also known as Shims and Wedges.  Available from Miles Supply in a variety of sizes.

 

How To Use:

  • Drill holes along your split line at least as deep as your wedges are long and about 6" apart.  The feathers and wedges should fit snugly into the hole.  The split line may be straight or curved. For more difficult splits, drill your holes deeper and place them closer together.

  • Insert feathers and wedges into the holes, be sure the "wings" sace the direction you want the stone to split.

  • Strike the wedges in sequence firmly.  Wait a few minutes, then repeat until the stone is split.
Size1 (W X L)  

1/2" X 2 1/2" Set (2 Feathers plus 1 Wedge)

or

3/4" X 3 3/4" Set (2 Feathers plus 1 Wedge)

1/2" X 2 1/2" Feathers Only (Replacement)

or

3/4" X 3 3/4" Feathers Only (Replacement)

1/2" X 2 1/2" Wedge Only (Replacement)

or

3/4" X 3 3/4" Wedge Only (Replacement)

 

1. Size (W) refers to the hole size to be drilled in order to use feather and wedge set. (L)    refers to the total length of the feather and wedge set.

 

Don't See What You Are Looking For?

If you you can't find a specific product or piece of equipment don't worry.  Chances are that we have what you are looking for but just don't have it listed yet.  You can send your request via email by clicking HERE.