Graphtec Cutting Plotter FC9000

Product Image Click Image to Enlarge

Cutting Pro FC9000 roll fed plotter cuts stencil for sandblasting monuments. The smallest width machine (FC9000-75) in this series suits memorial stencil uses; cuts 30″ width stencil. Since it’s friction feed, it can cut the other stencil widths as well as any stencil with punches, although not needed.

Click for brochures and specific tips for stencil. Specs below are Model 75 – You may obtain the other sizes through Miles Supply see specs here: https://www.graphteccorp.com/cutting/fc9000/

FC9000 is a superior quality cutting plotter. Its rigidity and media feeding, tool carriage performance have been improved from the previous model to enable more precise cutting.

  • FC9000-75
    Configuration Grit rolling type
    Drive method Digital servo drive
    Max. cutting area (W x L) 762mm × 50m ~ 30″ x 164′ when a basket is used
    Cutting area of guaranteed accuracy 29.2126″
    Max. cutting speed 1485mm/s at 45° direction
    Supported software Graphtec Studio 2, Cutting Master 5, Windows Driver, Graphtec Pro Studio, Graphtec Studio, Cutting Master 4 (see tips)
    Power source 100 V to 240 V AC, 50 / 60 Hz
    Power consumption Max. 120 W
    Operating environment 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
    Guaranteed accuracy environment 16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
    External dimensions* (W × D × H) Approx. 1360ｘ1151ｘ1232 mm ~ 53.5″ x 45.3″ x 48.5″
    Weight* (approx.) 49 kg ~108lb
    * Includes stand and basket.

(works with this software)