NEW! Multi-Wire Wire Saws and they are COMPACT!
Pellegrini has developed 2 wire saw machines in a smaller footprint.
Maximum cutting length (2 mt)
Maximum cutting height (1,2 mt)
Main motor rating power 45kW
Length of diamond wire (~14 mt)
Wire speed 0 ÷ 40 mt/s
Weight ~13 tons
Multiwire for smaller blocks & boulders
Compact multiwire saw for blocks up to 10 tons weight
10 slabs up to 10 cm thickness in the same drop and others.
4700 Height 15.41995
8000 Width 26.24672
3200 Depth 10.49869 ft for Decawire Compact
1200 Height 3.9′
2000 Width 6.56′
PATENTED compact multiwire saw for blocks of small sizes and/or irregular up to 10 tons weight. Characterized by a drum on the motor side and 10 tensioning flywheels, each independent from the other, and tensioned by the patented Multipull system to better manage the cutting conditions and optimize the life of the wires. The drum and the flywheels have a 1,5 mt diameter. A guide drum can be placed, as an accessory on request, on the tensioning side to guarantee further cutting precision. The slabs thicknesses can be easily adjusted thanks to the ‘E.A.S.T.’ system by moving manually the flywheels along the shaft and by inserting the open spacers, without the need to take out the flywheels. Possibility to realize 10 slabs up to 10 cm thickness in the same drop or other mixed thicknesses.
Nominal commercial slabs thicknesses depending on number of wires installed (7,3 mm diameter wires):
2 wires: 20 – 1000mm
3 wires: 20 – 490mm
4 wires: 20 – 320mm
5 wires: 20 – 240mm
6 wires: 20 – 190mm
7 wires: 20 – 150mm
8 wires: 20 – 130mm
9 wires: 20 – 110mm
10 wires:20 – 100mm
Maximum cutting length (3,6 mt)
Maximum cutting height (2,1 mt)
Wire speed (0 ÷ 40 mt/s)
Length of diamond wire (~18 mt)
Main motor rating power 160 kW
Weight ~27 tons
Are you producing 2″ slabs?
+40 per drop in a compact version
Multiwire up to 45 cuts!
43 at 4 cm in the same drop
3 cm thicknesses possible as well.
6200 Height 20.34121
9000 Width 29.52756
6000 Depth 19.68504 ft for Magicslab
2100 Height 6.9′
3600 Depth t 11.8′
PLURI-PATENTED multiwire saw characterized by an external arch that constitutes the cutting unit sliding vertically on the two columns. This group consists of a drum on the motor side and up to 45 tensioning flywheels complete with multi-groove bands, each independent from the other, and tensioned in order to better manage the cutting conditions and optimize the life of the wires. This system is completed by a return group and a multi-groove guide group in order to guarantee further cutting precision. The slabs thicknesses can be easily adjusted without moving the flywheels. Possibility to process a block 2 meters deep, realizing 43 slabs of 4 cm thickness, or mixed thicknesses
N° of diamond wires (7,3mm bead diameter)
43 wires 40mm Nominal commercial slab thickness (mm)
36 wires 50mm Nominal commercial slab thickness (mm)
click for quote for Decawire Compact
click for quote for MagicSlab